EPC Activity

Renovation & Restoration

Ageing PV systems lose yield silently. Eturn diagnoses underperformance, designs a targeted upgrade programme, and restores your asset to — or above — its original production potential.

180+
Systems renovated
across rooftop and field assets
+22%
Avg. yield recovery
after full restoration
10yr
Lifetime extension
typical post-renovation horizon
5
Countries
NL · BE · DE · FR · IT
What We Do

Recover what your system has lost

Every PV installation degrades over time — but degradation beyond the expected 0.5% per year almost always has a fixable cause. Faulty bypass diodes, corroded connectors, cracked modules, and ageing inverters quietly drain yield year after year without triggering obvious alarms.

Eturn's renovation and restoration service begins with a forensic technical assessment. We quantify the performance gap, identify every root cause, and design a targeted upgrade plan that restores output efficiently — extending asset lifetime and protecting long-term returns.

+22%
Avg. yield recovery
180+
Systems diagnosed
10 yrs
Lifetime extension
±2%
Diagnosis accuracy
Our Capabilities

Diagnosis through to delivery

We don't just replace parts — we rebuild performance. Every renovation is engineered from real data and executed to the same standard as a new installation.

Thermal & Electroluminescence Imaging

Drone-mounted thermal cameras and EL testing identify failing cells, delamination, PID-affected strings, and hotspots invisible to standard monitoring.

IV-Curve & Performance Analysis

String-level IV-curve testing benchmarks actual vs. expected output and pinpoints the exact modules and components degrading system performance.

Safety & Compliance Inspection

We check insulation resistance, earthing continuity, arc fault protection, and grid protection relay settings — flagging any safety deficiencies for immediate remediation.

Module & String Replacement

Selective replacement of underperforming modules, failed bypass diodes, and corroded junction boxes — re-matched to existing string voltage and current profiles.

Inverter Upgrade & Replacement

End-of-life inverter swap-outs, firmware upgrades, and reactive power compensation upgrades — all handled without interrupting the rest of the system.

Monitoring Reconnection

Where monitoring has lapsed or was never installed, we commission the ETURN Live platform so performance is tracked from the day renovation is complete.

How It Works

From diagnosis to restored performance

We treat every renovation as a new engineering project — beginning with data, not assumptions, and ending with a verified performance improvement.

01

Performance Baseline

We extract historical production data and compare it to what the system should have generated based on irradiance records — quantifying the exact performance gap.

02

Technical Inspection

Full on-site assessment including thermal imaging, IV-curve testing, visual inspection of modules and cabling, and inverter diagnostic readout.

03

Root Cause Report

We produce a prioritised defect register with cost-benefit analysis for each intervention — so you can make an informed decision about the scope of renovation.

04

Renovation Execution

Approved works are carried out by our certified installation crews, using matched replacement components sourced through our procurement network.

05

Post-Renovation Validation

We re-run IV-curve testing and performance benchmarking after works are complete to verify yield recovery meets our stated estimate.

Why Eturn

Why renovation is often better value than replacement

Yield

Recover lost production

On average, Eturn-renovated systems recover 22% of lost annual yield. For a 100 kWp system that's tens of thousands of kWh — and euros — back on the table each year.

Lifetime

Extend asset horizon

A properly renovated system can operate for 10+ additional years beyond its original design life — dramatically improving the ROI on your initial capital investment.

Value

Protect asset value

Lenders, insurers, and acquirers assess technical condition when valuing solar assets. A renovation report and restored production history materially improves asset bankability.

Cost

Fraction of replacement cost

Targeted renovation costs a fraction of full system replacement — often with a payback period of under two years when yield recovery is factored in.

Ready to start?

Is your system underperforming?

Share your monitoring data or site address and we'll run a preliminary performance analysis to determine whether a renovation would be worthwhile.